The Canbus Function Extender adds functions to your Volvo without making changes to your Volvo!
Hooked up to the OBD connector in your Volvo it works immediately, adding functions like: automatic window up, folding mirrors automatically, starting power heater with original remote, showing engine temp, battery voltage, inner temp on information display...
...making your 'older' Volvo 2016 ready!
The CFE is shipped with basic settings, which settings you can change (enable or disable / change the behaviour) with the free software available in the downloads section of the website.
CFE -> Canbus Function Extender
Canbus -> Digital network in your Volvo
What functions will work in my car?
Please see the tab "Specifications" for firmware supported functions.
Download the configuration application from the downloads section of our website, enter the VIN (=chassic number) of your car and see what functions are available for the Volvo belonging to the modelyear/age filtered from the VIN number you entered.
Please read the functions manual to understand how functions work and what depencies might be.
(For example : remote start of a power heater won't suddenly work with the CFE in case there's no programmable power heater in the car!)
How does the CFE work?
The CFE listens to network information (data packets) on the low-speed Canbus (the digital network in your Volvo).
This low-speed Canbus is used to communicate between the different (non-driving/safety related!) computers.
The CFE is able to understand the communications between the computers and respond to it as were it one of the computers in the car.
So for example; if the CFE understands from the communications that the key is entered in the ignition, it will instruct any available side-view mirror to unfold.
There is NO change made to your Volvo by the CFE.
If the CFE is removed (just pull it out of the OBD port) your Volvo is as original as it was before the CFE was connected.
The CFE can be used in any supported Volvo, and is not bound to the particular Volvo you are buying bought it for now.
I see different CFE's offered, what are the differences?
All CFE's are -hardware wise- exactly the same, they are all OBD modules.
Even the CFE-LE (Lite Edition) is the same hardware, it's just technically limited and won't allow updates and changes.
All CFE FULL editions work in all supported Volvo's.
All CFE LE editions work in supported Volvo's from MY 2005 and up.
In Volvo's from MY 1999-2004 the OBD port is "shutoff" if the car is closed. Therefore in a 1999-2004 Volvo a connection harness is required.
In Volvo's from MY 2005 and up the OBD port is not "shutoff" and therefor the CFE can be connected directly to the OBD port.
If you do not want the CFE to be connected to the OBD port, sets are offered with different harnesses, functions won't change, just the hookup location in your Volvo.
In the set:
- CFE OBD-V1 FULL (Electronics unit)
- CFE OBD Configuration cable (for configuration and firmware updates)
- USB cable (for connection between the CFE OBD Configuration cable and your PC)
|Items supplied in set|
YES ( USB <-> CFE )
|Harness for functional user connections||NO (Not required for CFE)|
|Harness to Auxiliairy||NO (Not required for CFE)|
|Harness to Can-network (CanBus)||
NO (Not required, connects to OBD port directly)
|Harness to Display||NO (Not required for CFE)|
|Harness to MEL-network (MELBUS)||
NO (Not required for CFE)
|Harness to MOST-network (MOSTBus)||
NO (Not required for CFE)
|Harness to Power||
NO (Included in the CanBus harness, or directly from OBD)
|Harness to Radio||NO (Not required for CFE)|
|Installation / User manual||NO (Available under downloads / manuals of the website. If your require additional info, please contact us!)|
|Unit (Electronics unit)||
YES ( CFE computer with embedded OBD connector )
|Available to user||USB connection (supplied cable) for programming and updating with a PC.|
|Network of Volvo||Connected to the Canbus of your Volvo using the OBD port, available in all supported Volvo's.|
|Update possible by user||User can update the CFE using the Updater Application available for free in the downloads section of our website.|
|Time required (estimate)||Installation : 15 seconds (open OBD hatch, push in CFE and close hatch). Configuration : preconfigured to be used directly|
|Volvo Dealer updates required||None|
|Tools optional||Torx 20 (Only to adjust OBD connector position slightly in case hatch won't close after CFE positioning)|
|Volvo Dealer compliant||YES (CFE switches to OFF if it finds a Volvo computer on the Can network automatically)|
|Unit dimensions||App. 5x3x2 cm|
|Power consumption (On mode)||App. 200 mA|
|Power consumption (Off mode)||App. 2 mA|
|Power On/Off logic||Trough Canbus logic|
Automatically activated. Mode switch possibe (summer/winter/off) with long-press on Reset button in car (left lever) or by PC application.
If the CFE finds a Volvo Service computer (Vida/Dice) on the Canbus, it automatically goes in "off" mode to avoid Service interruptions.
|Firmware||Bugfixing and limited development|
|Hardware||Final (No changes to hardware expected anymore)|
|Software||Final (No changes to software expected anymore)|
|Added Functions to your Volvo|
|Description of added functions||
Please read the functions manual to fully understand how functions operate and if there are any requirements to your Volvo for a certain function to work properly!
Canbus Function Extender Full (CFE-OBD-V1-FULL 05+) (VT-0161)
- Brand: VolvoTech.EU
- Product Code: VT-0161
- Reward Points: 19
- Availability: In Stock
- Ex Tax: 144.63€
- Price in reward points: 195
Tags: CFE, CFE OBD V1, Canbus Function Extender, Volvo Function Extender, Volvo Extender, Volvo window auto up, Volvo heater remote, Volvo dim info, Canbus Functie extender, cfe, cfe le, canbus function extender, volvo extra functies, volvo uitbreiding, volvo function extention, volvo additional functions, volvotech cfe, volvotech function etender